Tunnel oven

Ceetec Tunnel oven

The tunnel oven is supplied in modules of 6 metres each. Each module is made up of 2 zones that each has its own temperature and moisture control, thus optimising the curing process. IR technology may be installed in each zone, if preferred.

 

Inspection windows along the entire length of the oven provide optimum views and ease commissioning of new materials and varnishes. The operator is able to follow the product throughout the oven and adjust the temperature in the individual zones up and down, as required. It is easier to commission new materials and adjust the individual zones when you can see what happens inside the oven on a meter-by-meter basis.

 

The tunnel oven is a compact model that takes up little vertical space, thus preserving the overview of the production hall.

 

Capacity
Depends on the type of paint
Material dimensions
Max. 1300 mm width (as standard)
Power connection
Country-specific

Advantages of the Tunnel oven

  • Compact model with inspection windows throughout the whole oven
  • Each zone has its own temperature and moisture control
  • Optimised curing process through a combination of IR and propelling nozzle technology
  • Optimised energy consumption and environmentally friendly recirculation of heated air
  • Optimised air-cooling zone with the option of adding a water-cooling module
  • Inspection windows providing full overview of materials in the oven

CUSTOMER STATEMENTS

Owner of NK Skovservice
Ceetec provides machines that ensure perfect results, with minimal maintenance and easy mounting and cleaning.
Director of Moelven Langmoen, NO
Fully- automated painting proves a success recipe for MOELVEN
CEO, Homegoal ApS

At Homegoal, our production is highly dependent on Ceetec machinery and we always get competent advice or counseling when we ask.

Kresten Kristensen

Owner of NK Skovservice

”For more than 10 years, Ceetec has been my preferred supplier of finishing treatment machines for one simple reason. Ceetec provides machines that ensure perfect results, with minimal maintenance and easy mounting and cleaning. Whenever I use a Ceetec machine, it feels as if the manufacturer had me and my production in mind and was aware of the fact that we don’t always have time for advanced machinery that requires lengthy training.​

Every time I take out my Ceetec machines, they are ready for use. And once every blue moon when they break down, I don’t get annoyed as it is a unique opportunity for me to call Ceetec and have a nice chat about optimization, get good advice and the polite question, ‘Can we help you with anything else?’​

With Ceetec, I don’t feel that I am ‘just’ a customer. No, they make me feel that I am their most important customer.​

They know my machines, know that I am talking about and I have never contacted them in vain when we have accepted a finishing treatment task that requires a bit more than we bargained for…​

Why opt for a Ceetec machine? Try someone else’s and find out why!​

I give each and everybody from the Ceetec clan my warmest recommendations.”​

*NK Skovservice has a P40 Painting Machine, a A250 Painting Machine and an IS250 Sander

Steinar Lyseng

Owner Vyrk AS, Norway

The Norwegian company Vyrk has just had probably the most flexible and innovative spraying robot in the market installed in 2019​

The robot which has a spraying capacity of 200 metres/minute is equipped with a combined spraying and brushing technology and colours can be changed in just a few minutes.​

Read the article (in Norwegian) and learn more about what this machine has contributed to Norwegian Vyrk.